Ford Fusion V6 Sport Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
482 Posts
I don't have the dual port, I have the by pass one though, works fine
 

·
Registered
Joined
·
482 Posts
Dual port will vent either way I guess, What I did was buy a Boomba bypass adaptor, goes under the valve. Had that on mine for a couple month while I worked on tuning the valve. Makes it easier to hear it open if it's going to atmospher and not back to the intake track. It's just for making the woosh sound, there is no performance gain. The Turbo Smart valve will hold better with higher boost pressures and not open up like the stock ones are known to do sometimes
 

·
Registered
Joined
·
158 Posts
@Skipe you have a 2017...his question was for a 2019..... @dbsimms63 to my knowledge the BPV is different on the 2019 some how because the GFB diverters don't fit on a 2019 from my understanding...so I don't know if that's the case for the Turbosmart
 

·
Registered
Joined
·
201 Posts
Discussion Starter #6 (Edited)
Correct, the GFB won't fit apparently, but these will. I was wanting to try and get some feedback on throttle response using this one.
 
1 - 6 of 6 Posts
Top