Ford Fusion V6 Sport Forum banner

1 - 20 of 109 Posts

·
Registered
Joined
·
171 Posts
Discussion Starter #1 (Edited)
Turbo Tech Racing Power Core Intercooler!

Here is some updates:

-Large Bar and Plate Core 24" X 8" X 3.5"
-CAD Designed
-Thick Aluminum End Tanks
-CNC machined
-Professionally TIG Welded
-Port for factory MAP sensor to be installed
-Made in the USA!

Unlike other current intercoolers, we will be installing an air diverter into the inlet side of the intercooler tank. This greatly helps reduce turbulence and allows for a smoother air entrance into the core, and even distribution. See photos #2 and #3 below. The red colored part is the air diverter.

Product Link:
https://www.turbotechracing.com/productcart/pc/viewPrd.asp?idproduct=5612






 

·
Super Moderator
Joined
·
1,198 Posts
So I assume this won't happen then as posted HERE.

We will also be manufacturing a front mount intercooler. Thick durable end tanks, which are curved to advanced air flow, professionally TIG Welded by us/TTR in house, here in the USA! Direct fit/bolt on, no drill, no cutting.
 

·
Registered
Joined
·
171 Posts
Discussion Starter #3
So I assume this won't happen then as posted HERE.
Good question!

After further analysis of end tanks relative to input and output tubes, the curved tanks doesn’t do much difference, if any. The diverter flange showed the most need.

Ford has a diverter flange/profile in the stock intercooler, most likely same reason we found it is needed.
 

·
Registered
Joined
·
267 Posts
How is the list price $750.00 but you sell it for $550? If you're the manufacturer, wouldn't the list price be $550? You know Harbor Freight just lost a lawsuit over that, right? ;)
 

·
Registered
Joined
·
1,321 Posts
Good question!

After further analysis of end tanks relative to input and output tubes, the curved tanks doesn’t do much difference, if any. The diverter flange showed the most need.

Ford has a diverter flange/profile in the stock intercooler, most likely same reason we found it is needed.
What do you guys use for the analysis, just curious?
 

·
Registered
Joined
·
171 Posts
Discussion Starter #9
How is the list price $750.00 but you sell it for $550? If you're the manufacturer, wouldn't the list price be $550? You know Harbor Freight just lost a lawsuit over that, right? ;)
Fixed! Our system auto applied a value above the price, but we corrected this.

Thanks for pointing this out.
 

·
Registered
Joined
·
171 Posts
Discussion Starter #12
We are looking to do a "soft Launch" and ship one Intercooler out. If interested getting a discounted price, please PM us for details.
 

·
Registered
Joined
·
171 Posts
Discussion Starter #18
Intercooler has now been installed, on another Fusion, for 4 days. Perfect fit again! We will be releasing these soon, both Garrett and Vibrant core options.

Thanks @dlm1984 (Dale) for being a tester.

There were well over 15 members that offered to test, we appreciate all the support!

Installed photos and install guide will be posted up soon.
 

·
Registered
Joined
·
171 Posts
Discussion Starter #19
not at this price point though, I had the very first one for the Edge built, but due to location and the upped shipping cost, I found another buyer to keep the progression going for the Edge
PM us and we can look into making one for you. We would like to keep this thread on topic on discussion on the TTR Fusion Sport Intercooler only please.
 

·
Registered
Joined
·
171 Posts
Discussion Starter #20 (Edited)
Here is an installed photo:








These are currently going to be made to order. Price is $560 for the Vibrant, add $160 to upgrade to the Garrett core. Price includes the 3 "T Bolt Clamps" as standard!

Please allow 2 weeks for your intercooler to be built and prep to ship.





You may order here:
https://www.turbotechracing.com/productcart/pc/viewPrd.asp?idproduct=5612






Also please note, until further notice:
Does NOT fit models with Adaptive Cruise Control.

Reason being is we see some are "bending their module brackets, to allow other intercoolers to fit" and we are not comfortable allowing this, being this module is used as a safety feature.



Thanks,
 
1 - 20 of 109 Posts
Top