Ford Fusion V6 Sport Forum banner

Steeda springs are out

3791 Views 7 Replies 6 Participants Last post by  Vert
Also they have the adjustable end links so the factory CCD will work properly. Very interesting.

https://www.steeda.com/fusion/fusion-sport-suspension/
1 - 8 of 8 Posts
There is a recalibration process for the ride height sensors. It's possible you could simply have the car re-calibrated for the lower height, instead of moving the sensors.

Also, if anyone wants the service manual information on how to replace the springs send me a PM.
  • Like
Reactions: 2
@DaveE

I wanna see how the car sits with these springs. Did you get any pictures from steeda with them on a car?
I'm dying to see your car lowered!
  • Like
Reactions: 2
Dave, do you think you'll need the camber bolts?
  • Like
Reactions: 1
Can't wait to see it Dave..
  • Like
Reactions: 1
Do you have that recalibration process? Thanks!
The recalibration process is built into the Ford Scan Tool.
  • Like
Reactions: 1
Has anyone else tried these or others? The stock wheel gap is way too big.
Has anyone else tried these or others? The stock wheel gap is way too big.
Dave has them and you can read about them in his thread here
http://www.fusionsportforums.com/fo...ild-podium/2257-daves-sport-build-thread.html
  • Like
Reactions: 1
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top