Ford Fusion V6 Sport Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
689 Posts
Discussion Starter #1
Selling my meth kit as I bought bigger injectors and fuel pump and no longer need.

Attached you will find everything in the kit sold as new, including full wiring harness (never cut any wires, kept at full length).

This was pulled from a working application.

I have additional jets somewhere, not pictured, if needed I will look for them.

BUTTT
Also included is a replacement intake pipe with welded bung with jet in it. This jet is the jet you will need to run so additional ones are kind of useless.

The kit was ~500ish when bought plus the pipe was like $75 iirc.

Looking for $400 for everything free shipping or local pickup near Detroit.

I personally did not use the reservoir tank, I used my windshield tank instead, so the tank is brand new never used.

You will probably need to buy about 4-5' of the red piping or more if you trunk mount the reservoir. It is cheap from Home Depot.

Also included is a switch and fuse to turn the meth on/off and stay protected.

I ran this meth with 93, e30, and e50 mixes and all were noticeably more power with the meth especially at the top end side.

Installation/removal takes less than 30 minutes. You will need a boost reference to plug in the boost controller. I can assist what to do and where.

Original link.
26699



tldr: $400 for meth kit plus intake with welded bung.
 

·
Registered
Joined
·
689 Posts
Discussion Starter #3
I am having them made for me will release after dyno.
 

·
Registered
Joined
·
689 Posts
Discussion Starter #4
New price $300.
 

·
Registered
Joined
·
68 Posts
Wish I saw this before I dropped $3000 on wheels and tires. Damn
 

·
Registered
Joined
·
689 Posts
Discussion Starter #6
I know a few people have DM'ed me and I just got around to replying, my dad passed suddenly 2 weeks ago and I haven't been online.
 

·
Registered
Joined
·
80 Posts
Hey @DetroitFS I'm sorry to hear that. Thoughts for you and your family.
 
1 - 7 of 7 Posts
Top