Ford Fusion V6 Sport Forum banner

IPC Control of Adaptive Steering and Continuously Controlled Damping (CCD) Suspension

69231 Views 241 Replies 51 Participants Last post by  Vidmo
2

This mod requires FORScan (PC Version) and an OBDLink MX (or similar OBD Device that supports MS-CAN):

For 2017+ Fusion Sport Only:

IPC (Instrument Cluster Panel) Changes (Module 720):

Continuously Controlled Damping (CCD) Suspension Control:
720-01-01 xxxx xxxX xxxx
Enabled: Add 8 to value at X... (example if it is a 4 make it a C (12))

Adaptive Steering Control:

720-04-01 xxxx xxxX xxxx
Enabled: Add 1 to value at X

Thanks @DaMiFo for testing this modification out... and taking these photos:





Reference Thread: HOW TO: FORScan - Modify Module As-Built Data (Detailed)


See less See more
  • Like
Reactions: 5
241 - 242 of 242 Posts
it is not possible to run coil overs and stock struts unfortunately. how would i delete the vdm ? and what is rpg?
how do you do a ride height reset?
i sent a link in one of my other posts to the RPG DID live valve bypass device.. it plugs into the VDM and gives it readings as though the shocks are present and completely intact.

here it is again: 2019 UP Raptor Live Valve Bypass DID - RPG Offroad

i do not know for sure if this device will plug into our VDM, id almost bet it would work.. but i can look at my 2019 raptor and compare it to my 2017 Fusion, but you might want to try calling RPG and asking if they have any idea if it will work on the Fusion sport..

theres no sense in calibrating the ride height if your shocks are not intact. its to zero out the computer and the shock valves so the computer knows where ride height is..
  • Like
Reactions: 1
it is not possible to run coil overs and stock struts unfortunately. how would i delete the vdm ? and what is rpg?
Just saw this on the FB page.
Active Electronic Strut Bypass Kit. For GMC, Cadillac, Chevrolet, Ford 2013-2019 963941783992 | eBay
  • Like
Reactions: 1
241 - 242 of 242 Posts
Top