Ford Fusion V6 Sport Forum banner

381 - 400 of 407 Posts

·
Registered
Joined
·
717 Posts
Discussion Starter #382
The rear deck subs, soldered the line level to the speaker tabs.

No.


Yes, only way I sit.
 

·
Registered
Joined
·
717 Posts
Discussion Starter #386
It sounds great. It filled in the missing bottom end nicely using only about half the gain.

You can put in 10 if you can find locations for them all. Lol.
 
  • Like
Reactions: Oreo

·
Registered
Joined
·
230 Posts
The rear deck subs, soldered the line level to the speaker tabs.



Do you have any pictures of the install? I would like to do the same but have one under both seats.
 

·
Registered
Joined
·
349 Posts
If using high level inputs you should always tap a full range driver not a stock sub that is being cross overed already really low in frequency, always best to grab the signal behind the head unit in it's most pure form unaltered by amplifier.
 

·
Registered
Joined
·
717 Posts
Discussion Starter #389
It sounds perfectly fine. I don't need signals above 125 hz.
 

·
Registered
Joined
·
717 Posts
Discussion Starter #390
Going in for oil pan leak #2 after 4,000 miles....
 

·
Registered
Joined
·
717 Posts
Discussion Starter #392
I got it done the first time around 26,000.
 

·
Registered
Joined
·
1,029 Posts
How bad is the leaking? Are you getting drips onto the ground?
 

·
Registered
Joined
·
717 Posts
Discussion Starter #395
How bad is the leaking? Are you getting drips onto the ground?
2'x1' wet spot and the shield is all wet. Worse than the first time.
 

·
Registered
Joined
·
717 Posts
Discussion Starter #396
Car's back. Hopefully the oil pan leak doesn't come back. New bearing and axle. RDU oil changed. Vinyl overlay in the steering wheel emblem.
26438
 

·
Registered
Joined
·
717 Posts
Discussion Starter #398
I’m looking at springs. How do you like the ride of the Steeda’s? Looks great!
Thanks. It rides fine considering we have the electronic shocks and I have comfort enabled.
 

·
Registered
Joined
·
717 Posts
Discussion Starter #400
Finally got mine into dealer. Needs new oil pan as well.

Sent from my SM-N960U using Tapatalk
If my memory serves, they're supposed to replace the pan everytime this procedure is done.
 
381 - 400 of 407 Posts
Top