Turbo Tech Racing Power Core Intercooler! - 2017 Ford Fusion V6 Sport Forum
 21Likes
Reply
 
LinkBack Thread Tools
post #1 of 83 (permalink) Old 04-28-2018, 04:02 PM Thread Starter
Vendor
 
turbotechracing's Avatar
 
Join Date: Apr 2018
Posts: 146
Garage
Exclamation Turbo Tech Racing Power Core Intercooler!

Turbo Tech Racing Power Core Intercooler!

Here is some updates:

-Large Bar and Plate Core 24" X 8" X 3.5"
-CAD Designed
-Thick Aluminum End Tanks
-CNC machined
-Professionally TIG Welded
-Port for factory MAP sensor to be installed
-Made in the USA!

Unlike other current intercoolers, we will be installing an air diverter into the inlet side of the intercooler tank. This greatly helps reduce turbulence and allows for a smoother air entrance into the core, and even distribution. See photos #2 and #3 below. The red colored part is the air diverter.

Product Link:
https://www.turbotechracing.com/prod...idproduct=5612






WaterISWet likes this.

Aaron
Turbo Tech Racing


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by turbotechracing; 04-28-2018 at 04:10 PM.
turbotechracing is online now  
Sponsored Links
Advertisement
 
post #2 of 83 (permalink) Old 04-28-2018, 07:02 PM
Super Moderator
 
Oreo's Avatar
 
Join Date: Jan 2017
Location: South Louisiana
Posts: 1,034
Garage
So I assume this won't happen then as posted HERE.

Quote:
Originally Posted by turbotechracing View Post

We will also be manufacturing a front mount intercooler. Thick durable end tanks, which are curved to advanced air flow, professionally TIG Welded by us/TTR in house, here in the USA! Direct fit/bolt on, no drill, no cutting.
turbotechracing likes this.

2017 Fusion Sport Oxford White, 401A, Driver Assist Pkg, Steeda Strut Tower Brace, Hood Strut Kit, Rear Sway bar, CAI Kit, Tracy Lewis Performance Signature Series Dual Valve Catch Can, Amsoil Synthetic 5W-30 Signature Series Motor Oil


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
Oreo is online now  
post #3 of 83 (permalink) Old 04-28-2018, 08:00 PM Thread Starter
Vendor
 
turbotechracing's Avatar
 
Join Date: Apr 2018
Posts: 146
Garage
Quote:
Originally Posted by Oreo View Post
So I assume this won't happen then as posted HERE.
Good question!

After further analysis of end tanks relative to input and output tubes, the curved tanks doesn’t do much difference, if any. The diverter flange showed the most need.

Ford has a diverter flange/profile in the stock intercooler, most likely same reason we found it is needed.

Aaron
Turbo Tech Racing


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
turbotechracing is online now  
 
post #4 of 83 (permalink) Old 04-28-2018, 11:14 PM
Senior Member
 
Walleballr's Avatar
 
Join Date: Feb 2018
Location: Vegas baby
Posts: 245
See the price is up 49 bucks already. Any idea when and if you get them going?
Walleballr is offline  
post #5 of 83 (permalink) Old 04-28-2018, 11:41 PM Thread Starter
Vendor
 
turbotechracing's Avatar
 
Join Date: Apr 2018
Posts: 146
Garage
Quote:
Originally Posted by Walleballr View Post
See the price is up 49 bucks already. Any idea when and if you get them going?
We are adding standard T bolt clamps

Price may go down closer to original estimate once final cost come in. Just a place holder for now.

Aaron
Turbo Tech Racing


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
turbotechracing is online now  
post #6 of 83 (permalink) Old 04-29-2018, 01:46 AM
Senior Member
 
i8acobra's Avatar
 
Join Date: Dec 2017
Location: Las Vegas, NV
Posts: 267
How is the list price $750.00 but you sell it for $550? If you're the manufacturer, wouldn't the list price be $550? You know Harbor Freight just lost a lawsuit over that, right?
i8acobra is offline  
post #7 of 83 (permalink) Old 04-29-2018, 08:39 AM
OX1
Senior Member
 
Join Date: Jul 2016
Posts: 1,135
Quote:
Originally Posted by i8acobra View Post
You know Harbor Freight just lost a lawsuit over that, right?
Did they, glad to hear it.
OX1 is online now  
post #8 of 83 (permalink) Old 04-29-2018, 09:08 AM
OX1
Senior Member
 
Join Date: Jul 2016
Posts: 1,135
Quote:
Originally Posted by turbotechracing View Post
Good question!

After further analysis of end tanks relative to input and output tubes, the curved tanks doesn’t do much difference, if any. The diverter flange showed the most need.

Ford has a diverter flange/profile in the stock intercooler, most likely same reason we found it is needed.
What do you guys use for the analysis, just curious?
OX1 is online now  
post #9 of 83 (permalink) Old 04-29-2018, 09:40 AM Thread Starter
Vendor
 
turbotechracing's Avatar
 
Join Date: Apr 2018
Posts: 146
Garage
Quote:
Originally Posted by i8acobra View Post
How is the list price $750.00 but you sell it for $550? If you're the manufacturer, wouldn't the list price be $550? You know Harbor Freight just lost a lawsuit over that, right?
Fixed! Our system auto applied a value above the price, but we corrected this.

Thanks for pointing this out.

Aaron
Turbo Tech Racing


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
turbotechracing is online now  
post #10 of 83 (permalink) Old 04-29-2018, 09:40 AM Thread Starter
Vendor
 
turbotechracing's Avatar
 
Join Date: Apr 2018
Posts: 146
Garage
Quote:
Originally Posted by OX1 View Post
What do you guys use for the analysis, just curious?
Solidworks...

Aaron
Turbo Tech Racing


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
turbotechracing is online now  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the 2017 Ford Fusion V6 Sport Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
Garrett Vs Vibrant Intercooler Core darkstar Engine and Technical Discussion 59 02-06-2019 03:30 PM
NEW PRODUCTS @ Turbo Tech Racing turbotechracing Vendor Deals 42 04-28-2018 08:31 AM
Turbo Tech Racing turbotechracing New Member Introductions 11 04-25-2018 09:33 AM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome